Training on Product Knowledge for Rescue and Fire Fighting Equipment
In August 2023, Global Instech Ltd.'s product specialist organized the "Coldcut Cobra, HNE" for sales representatives held in our meeting room located on the 2nd floor. The training aims to acquire knowledge of the product specifications and be able to communicate those details to our customers.
Product Features: Coldcut Cobra from Sweden
Coldcut Cobra technology combines ultra-high-pressure water mist with special sand powder to penetrate structures. Efficiently, Cobra is vehicle-mountable and can be used on land, at sea, or on aircraft carriers. And easily transported to the scene of the accident, Cobra's performance can be increased by using a universal nozzle (60 lpm at 90 bar) with or without foam additives.
Coldcut systems are designed and optimized for marine applications. Manufactured
Primarily from stainless steel, along with marine engines. It is waterproof and dustproof, engineered to be shockproof, and can also be used with salt water.
Large trucks can be equipped with a wide range of Cobra kits, such as PTO driver trains, from split PTO or split shafts to hydraulic transmissions, and users can operate the main water pump simultaneously when needed.
Medium and small trucks can be installed. Cobra, but since the space is very small, it is necessary to use a locker. Small side hatch to carry equipment, hose reels, controls, and lance. Power requirements for the Cobra are only 40 kilowatts.
Small vehicles (under 3 tons) will be able to install the smallest unit in the Cobra range, a system with 30 liters per minute at 300 bar, meaning exceptionally low water consumption. While maintaining high fire extinguishing efficiency, it can be installed and disassembled if necessary.
Product Features: HNE from Germany
The VARIO 13 Carbon high-pressure fire extinguisher is lightweight, with a maximum range of 20m in PRESS mode. It is safe to fire so that a greater distance can be maintained from the flames. The system can optionally be equipped with a VARIO function, which allows switching between different.
Spray modes with up to three modes of VARIO carbon bubbles can be adjusted at any time. From low-expansion liquid foam (PRESS) to adhesive CAFS foam (LICAES) and expanding tactical possibilities.
By quickly adapting to fire situations. In case of using a rotating gun, it can be changed from a full jet to a spray jet. By simply rotating the spindle Sprays produce smaller droplets and a larger surface area. Therefore, it is suitable for post-work. It extinguishes fires and wets large areas.
- Maximum beam distance: 21m
- Capacity of 9 or 13 liters
- Removal rate: 2x 55A and M B (HPRESS 13)
- Weight less than 20 kg or 25 kg with filling
- After use, it can be easily refilled without tools.
- VARIO Carbon: maximum flexibility in use
Product Features: Coldcut Cobra from Sweden
Coldcut Cobra technology combines ultra-high-pressure water mist with special sand powder to penetrate structures. Efficiently, Cobra is vehicle-mountable and can be used on land, at sea, or on aircraft carriers. And easily transported to the scene of the accident, Cobra's performance can be increased by using a universal nozzle (60 lpm at 90 bar) with or without foam additives.
Coldcut systems are designed and optimized for marine applications. Manufactured
Primarily from stainless steel, along with marine engines. It is waterproof and dustproof, engineered to be shockproof, and can also be used with salt water.
Large trucks can be equipped with a wide range of Cobra kits, such as PTO driver trains, from split PTO or split shafts to hydraulic transmissions, and users can operate the main water pump simultaneously when needed.
Medium and small trucks can be installed. Cobra, but since the space is very small, it is necessary to use a locker. Small side hatch to carry equipment, hose reels, controls, and lance. Power requirements for the Cobra are only 40 kilowatts.
Small vehicles (under 3 tons) will be able to install the smallest unit in the Cobra range, a system with 30 liters per minute at 300 bar, meaning exceptionally low water consumption. While maintaining high fire extinguishing efficiency, it can be installed and disassembled if necessary.
Product Features: HNE from Germany
The VARIO 13 Carbon high-pressure fire extinguisher is lightweight, with a maximum range of 20m in PRESS mode. It is safe to fire so that a greater distance can be maintained from the flames. The system can optionally be equipped with a VARIO function, which allows switching between different.
Spray modes with up to three modes of VARIO carbon bubbles can be adjusted at any time. From low-expansion liquid foam (PRESS) to adhesive CAFS foam (LICAES) and expanding tactical possibilities.
By quickly adapting to fire situations. In case of using a rotating gun, it can be changed from a full jet to a spray jet. By simply rotating the spindle Sprays produce smaller droplets and a larger surface area. Therefore, it is suitable for post-work. It extinguishes fires and wets large areas.
- Maximum beam distance: 21m
- Capacity of 9 or 13 liters
- Removal rate: 2x 55A and M B (HPRESS 13)
- Weight less than 20 kg or 25 kg with filling
- After use, it can be easily refilled without tools.
- VARIO Carbon: maximum flexibility in use